Flash memory products

In short

WINTEL produces four flash memory product lines, covering removable cards through to bare boards. TF cards at 15 × 11 × 1 mm, 4GB to 256GB, for devices with a card slot. UDP modules at 11.3 × 24.8 × 1.45 mm and semi-finished boards at 12 × 44 × 4.5 mm, 128MB to 128GB, for storage designed permanently into your product. And custom USB flash drives in metal, PVC and wood for branded products. Every line is available with USB 2.0 or USB 3.0 interfaces, A+ grade flash from named sources, and capacity, speed and housing specified to your project.

A flash memory product line is one physical format of flash device — a removable card, a soldered module, a bare board or a branded drive — built to one buyer's specification rather than to a retail catalogue. WINTEL runs four: TF cards at 15 × 11 × 1 mm, UDP modules at 11.3 × 24.8 × 1.45 mm, semi-finished boards at 12 × 44 × 4.5 mm, and custom USB flash drives, spanning 128MB to 256GB.

TF cards printed with a customer logo in black, purple and red, shown front and back

TF Card

15 × 11 × 1 mm cards for dashcams, cameras and portable devices.

  • Dimensions 15mm × 11mm × 1mm
  • Interface MicroSD-class (via card reader)
  • Capacities 4GB–256GB
Full specification →
UDP module shown front and back, with the PCB and controller chip visible from the reverse

UDP Module

Ultra-thin UDP chips soldered directly onto your own PCB.

  • Dimensions 11.3mm × 24.8mm × 1.45mm
  • Interface USB2.0 / USB3.0
  • Capacities 128MB–128GB
Full specification →

Every body in stock, by size

The four formats above are the categories. Inside them we run specific bodies — different lengths, weights and print areas — and the body is usually what decides whether a drive gets carried or left in a drawer. Each one has its own page with dimensions, capacity range and what it is not suitable for.

Body Format Style Dimensions Weight
Monitoring microSD card tf card Card 15 × 11 × 1 mm 0.4 g (bare card)
Metal card body 51 × 21 usb drive Card 51 × 21 × 9 mm 5 g
Metal bar 33 / 39 mm usb drive Bar 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) 8 g
Swivel 67 × 19.5 usb drive Swivel 67.5 × 19.5 × 10.7 mm 10 g
Plastic card body 51 × 21 usb drive Card 51 × 21 × 9 mm 5 g
Mini swivel 45 × 15 usb drive Swivel 45 × 15 × 8 mm 10 g
Mini 30 × 12.5 usb drive Mini 30 × 12.5 × 5 mm (24 × 12 × 4 mm version for tighter housings) 6 g
Paw-shape 42 × 12 usb drive Shaped 42 × 12 × 5 mm 10 g
Semi-finished PCBA 12 × 48 semi finished PCBA 12 × 48 × 4.5 mm (44 mm standard, 57 mm dual-head, 62 mm USB-C long version) 3.2 g
Robot-shape 65 × 20 usb drive Shaped 65 × 20 × 10 mm 8 g
USB-C swivel 68 × 16 usb drive Swivel 68 × 16 × 11 mm 12 g
Dual-connector OTG 70 × 20 usb drive Swivel 70 × 20 × 5 mm 30 g (as supplied)
Swivel 57 × 20 usb drive Swivel 57 × 20 × 10 mm 14 g
Wheat-straw bar usb drive Bar 85 × 45 × 18 mm packed; moulded bar, 8 g 8 g
Folding dual 32 × 15 usb drive Folding dual 32.5 × 15.2 mm, 20 g 20 g
Black epoxy UDP 25 × 11 udp Bare module 25 × 11.3 × 1.4 mm 0.819 g

Clearance stock — overstock lots, sold while they last

Finished drives already in the warehouse: production overruns, cancelled orders and the tail of completed runs. Same build as a regular order, but the tooling, sample round and production slot behind them are already paid for — which is where the saving comes from.

Quantities are fixed and lots do not restock, so it suits giveaways, internal use and topping up a programme rather than a product you ship for years. Plain bodies can still carry your logo.

How clearance stock works

Choosing between them

The decision usually comes down to one question: should the storage be removable from your product or fixed inside it? Our guide to the three physical formats explains the trade-offs.

UDP vs PCB vs COB — how USB flash formats differ →

Which format fits your device

The three embedded formats carry the same flash inside, but they sit in different mechanical worlds. Match the storage to how your product is built, not to the headline capacity — the card reaches 256GB while the module and board stop at 128GB, and only the card is removable.

Removable storage in a card slot

TF card — 15 × 11 × 1 mm, 0.25 g, 4GB–256GB

  • Your product has a sprung card socket
  • Capacity may exceed 128GB (the card reaches 256GB)
  • The end user may swap the card in the field
TF card specification →

Storage soldered into the product

UDP module — 11.3 × 24.8 × 1.45 mm, 0.819 g, 128MB–128GB

  • No card slot; the unit is potted COB and encapsulated
  • Capacity stays at or below 128GB
  • Shock load sits on the USB joint, not a latch
UDP module specification →

You own the final assembly

Semi-finished board — 12 × 44 × 4.5 mm, 3.2 g, 128MB–128GB

  • You finish the housing and soldering in your own line
  • Heaviest of the three at 3.2 g
  • Best when you want to control the last build step
Semi-finished board →

Branded giveaway or promo USB

Custom USB flash drives — metal, PVC, wood, moulded

  • Your logo, shape and packaging on a finished drive
  • A finished product, not an embedded component
  • For marketing, events and resale
Custom USB drives →

Price a card, a module or a finished drive

Custom USB drives run US$2–6 per unit at 500 pieces and above. Cards and modules are quoted per project. Tell us the quantity and where it ships, and we reply within 1 business day with a number rather than an invitation to book a call.

Prefer email? cathy@go-wintel.com — answered by Cathy, sales engineer.

Frequently asked questions

Which product families does WINTEL manufacture?

Four: TF and microSD-class memory cards, UDP (USB Disk in Package) modules, finished USB flash drives, and semi-finished boards for buyers who assemble in-house. Each family is quoted separately because the tooling, test plan and MOQ differ.

What capacities are available?

Memory cards run from 4GB to 256GB. USB drives and UDP modules are quoted by the capacity you specify, from small-capacity promotional runs to high-capacity programmes. Availability at the top of the range depends on current NAND supply, so capacity is confirmed at quotation rather than assumed.

Can the products carry our branding?

Yes. Cards and drives can be printed or laser-engraved with your artwork, and packaging can be plain, printed or fully custom. Artwork is approved on a physical sample before bulk production starts.

How do I get pricing for a specific product?

Send the product family, capacity, quantity, branding requirement and target date. We reply to business enquiries within one business day with either a quotation or the specific questions needed to build one.

WhatsApp / WeChat Request a quote