Robot-Shape USB Drive — 65 × 20 × 10 mm Moulded Character Body
This is a moulded character body rather than a bar with a design on it: 65 × 20 × 10 mm, 8 g, in plastic, with the drive built into a robot silhouette. It carries 8GB to 64GB and takes USB 2.0, 3.0 or 3.1. Character bodies are chosen for youth programmes, gaming and tech events, and internal campaigns where the object has to be kept rather than filed. The trade is packing — a shaped body needs a cavity cut to its outline. WINTEL supplies this from its own plant in Shenzhen, China.
At a glance
- Body styleShaped
- MaterialMoulded plastic (ABS)
- Dimensions65 × 20 × 10 mm
- Weight8 g
- InterfaceUSB 2.0 / USB 3.0 / USB 3.1
- Capacities8GB / 16GB / 32GB / 64GB
- ReferenceRB-65
What this body is
A character body buys attention, not durability. It is the drive people pick up off a table, which is the entire point of a promotional object — and the reason the packing has to be cut to fit it.
| Property | Value |
|---|---|
| Body | Moulded plastic character, 65 × 20 × 10 mm |
| Weight | 8 g |
| Interface | USB 2.0, USB 3.0 or USB 3.1 |
| Capacity range | 8GB – 64GB |
| Read / write | Interface-dependent; quoted per project above USB 2.0 |
| Branding | Silk-screen, pad print, colour print, laser engraving |
| Print area | Curved surfaces of the character — artwork needs a wrap allowance |
| Default packing | Poly bag |
| Box | Cut cavity to the body outline, quoted separately |
| Tooling | Stock character mould |
| Minimum order | 50 pieces per design |
What you can specify on this body
Capacity
8GB · 16GB · 32GB · 64GB
Interface
USB 2.0 / USB 3.0 / USB 3.1
Colour
Silver · Black · Custom colour at volume
Branding
Silk-screen print · Pad print · Colour print · Laser engraving
Packing: Poly bag by default; a cut-cavity box is quoted separately because the outline is not a standard rectangle.
Tooling: Stock character mould. A different character needs a new tool — this is a tooling project, not a print change.
Typical production time once the sample is approved: 1–3 days on stock bodies; print adds the approval step..
When this one is the right choice
Youth, gaming and tech events
The object has to compete with everything else in a goodie bag. A character body is picked up; a rectangular drive with the same logo is not.
Internal campaigns and team gifts
A character reads as a gift rather than stationery, which changes whether it goes home or stays in a desk drawer.
Buyers who need USB 3.0 or 3.1
This body is quoted across all three interfaces, so a fast drive can still be a shaped one — which is not true of every character mould in the market.
When it is not
- Orders needing a printed box at low volume. The cavity has to be cut to the character outline, so a standard box will not hold it and a custom one has its own minimum.
- Briefs where artwork must be printed flat and exact. The body is curved, so artwork wraps and distorts at the edges — a precise layout will not survive.
- Daily-carry use on a keyring. There is no loop and the moulding is plastic; this is a gift object, not a workhorse.
What to confirm before the order is placed
- Send artwork as a wrap, not a flat layout. The printable surfaces are curved, and a design that looks right in a rectangle will distort where it rolls over the edge.
- Decide the box with the drive, not after. A cavity cut to the character outline is a separate tooling item and its own minimum, and it is the item that most often delays a gift programme.
- Confirm the interface against the content. A 64GB drive on USB 2.0 takes a long time to fill at the factory and to read in the field; if the content is video, specify 3.0.
- Check whether the character needs to stand upright. Some moulds are designed to stand and some only to lie down — if the drive is going on a desk, that matters.
This body in photographs
Other bodies in this family
Same flash inside, different shell — the body decides tooling cost, print area and how the drive survives daily use. Compare on those three, not on the photo.
| Model | Body style | Dimensions | Material | Best for |
|---|---|---|---|---|
| Robot-shape 65 × 20 — this page | Shaped | 65 × 20 × 10 mm | Moulded plastic (ABS) | Youth, gaming and tech events |
| Paw-shape 42 × 12 | Shaped | 42 × 12 × 5 mm | Anodised aluminium | Veterinary, pet retail and animal charities |
| Plastic card body 51 × 21 | Card | 51 × 21 × 9 mm | ABS plastic | High-volume promotional runs |
| Metal card body 51 × 21 | Card | 51 × 21 × 9 mm | Metal (zinc alloy body) | Tender and bid packs |
| Metal bar 33 / 39 mm | Bar | 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) | Anodised aluminium | Keyring and lanyard programmes |
| Swivel 67 × 19.5 | Swivel | 67.5 × 19.5 × 10.7 mm | Metal (zinc alloy) | Drives that live in a bag or a pocket |
| Mini swivel 45 × 15 | Swivel | 45 × 15 × 8 mm | Metal (zinc alloy) | Keyrings and badge lanyards |
Where this body ends up
- Promotional and event drives Character object for events and campaigns
- Education and training Student and course hand-outs
Quote this body
Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.
Or email cathy@go-wintel.com — answered by Cathy, sales engineer.
Frequently asked questions
Can the character be changed to ours?
That is a new mould, not a print change. It needs a 3D model, a tool and a volume that pays for the tool — typically a project measured in months rather than days. The stock character body is what makes small orders possible.
Why is the box a separate cost?
Because the body is not a rectangle. A printed box for a standard drive uses a die-cut cavity that already exists; a character body needs a cavity cut to its outline, which is its own tooling item and its own minimum per design.
Is USB 3.1 real on this body?
Yes, and it is quoted per project rather than from the USB 2.0 band, because the interface changes the board inside. If the content is video or a large software image, specify it — a 64GB drive over USB 2.0 is slow to fill and slow to read.
Will the print wear on the curved surfaces?
It wears at the high points first, which on a character body means the edges of the moulding. Pad print handles curves better than a flat screen print; engraving avoids wear but is single-colour and reads differently on plastic.
What capacities are sensible?
8GB to 64GB. Most event content — a deck, a video, a brochure — fits in 8GB to 16GB, and specifying 64GB for that is paying for capacity nobody uses.