Custom USB Flash Drive Manufacturer — OEM & Branded Drives
WINTEL makes custom USB flash drives for companies that need their own brand on the product, not a generic stick. You choose the body — metal, PVC or wood — the capacity from 128MB to 128GB, the USB 2.0 or USB 3.0 interface, and the branding method: silk-screen print, colour print or laser engraving. We can also mould a bespoke shape to your own design. Because the flash is produced in-house, the capacity and speed inside the branded body are specified by you rather than set by whatever module happens to be in stock.
A custom USB flash drive is a standard flash module built into a body, finish and mark that belong to one buyer rather than to a retail line. WINTEL makes it from 128MB to 128GB on USB 2.0 or 3.0 in metal, PVC or wood, and can tool a shape that exists nowhere else.
Specifications
- DimensionsSet by body style
- WeightVaries by body
- InterfaceUSB2.0 / USB3.0
- Flash gradeA+ Grade
- Capacities128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB / 32GB / 64GB / 128GB
What you can specify
- Body material: metal, PVC or wood
- Bespoke shape and mould to your design
- Branding: silk-screen, colour print, laser engraving
- Dual interface: USB-A and USB-C on one body
- Mini / short body for flush in-vehicle use
- Capacity and interface version
- Presentation box and accessories
Where it is used
- Promotional & corporate gifts Brand giveaways at scale
- Car dealerships Launch events, showroom handovers and test-drive packs — where the date on the box is the product
- Breweries & taprooms Taproom retail, festival stands and distributor kits, on bodies that survive a wet room
- Schools & universities Admissions packs, graduation keepsakes and course media, ordered against a fixed term date
- Gyms & fitness chains Member onboarding and challenge premiums, where the body fails long before the flash does
- Real estate agencies Open-house packs that outlive the listing they advertise — if the details are printed the right way
- Banks & insurance Client gifting where the register matters more than the drive, and cheap media is the compliance risk
- White-label & private label Your brand on the product, our name on the test record — what comes off and what stays
- Bulk orders from 50,000 units What moves between runs, and what a capacity figure does and does not tell you
Supply notes
- A+ grade flash with silicon from SanDisk, Toshiba, Micron, SK Hynix, Intel and Samsung
- Controller solutions: Alcor, ITE, Xinbang, Micov
- Metal, PVC and wood body production with in-house marking
Which flash format fits your design
Four formats leave this factory, and the difference between them is mostly mechanical: whether the storage is removable, whether it is sealed inside the product, and who owns the housing. Compare them before you compare prices, because they are not interchangeable.
| Format | What it physically is | Choose it when | The trade you are making |
|---|---|---|---|
| TF card (microSD) | 15 × 11 × 1 mm removable card, 0.25 g | Devices that already have a card slot; storage the end user or field engineer can swap | The socket is the mechanical weak point, and the card is only as good as its grade |
| UDP module | Encapsulated die + controller, no housing, no connector | Sealed, soldered-down storage for small devices — no socket, no shell, no user access | Needs a PCB footprint and reflow assembly; cannot be replaced in the field |
| USB flash drive — this page | Finished drive: connector, controller and housing | Branding, gifting, software and media delivery, retail-ready presentation | Housing, print and packaging — not the silicon — drive the cost and the MOQ |
| Semi-finished PCBA | Assembled flash board, no housing, no branding | Buyers who already own the shell, the print process or the final assembly line | You carry the tooling and the branding yield, and the warranty boundary sits with you |
Applications
Promotional & corporate gifts
Brand giveaways at scale
Read the requirements →Car dealerships
Launch events, showroom handovers and test-drive packs — where the date on the box is the product
Read the requirements →Breweries & taprooms
Taproom retail, festival stands and distributor kits, on bodies that survive a wet room
Read the requirements →Schools & universities
Admissions packs, graduation keepsakes and course media, ordered against a fixed term date
Read the requirements →Gyms & fitness chains
Member onboarding and challenge premiums, where the body fails long before the flash does
Read the requirements →Real estate agencies
Open-house packs that outlive the listing they advertise — if the details are printed the right way
Read the requirements →Banks & insurance
Client gifting where the register matters more than the drive, and cheap media is the compliance risk
Read the requirements →White-label & private label
Your brand on the product, our name on the test record — what comes off and what stays
Read the requirements →Bulk orders from 50,000 units
What moves between runs, and what a capacity figure does and does not tell you
Read the requirements →Customization
- Body material: metal, PVC or wood
- Bespoke shape and mould to your design
- Branding: silk-screen, colour print, laser engraving
- Dual interface: USB-A and USB-C on one body
- Mini / short body for flush in-vehicle use
- Capacity and interface version
- Presentation box and accessories
What to put in the USB Flash Drive specification
On a custom USB drive the silicon is often the cheapest part of the order. What decides your price and your delivery date is everything around it — so the specification has to cover all of it.
- Interface and real throughput USB 2.0 and USB 3.0 change the controller, the connector and the price. Specify the interface and the throughput your use case needs, not just the interface name. Read more →
- Capacity and usable space The same nominal capacity gives different free space depending on file system and controller overhead — relevant when you are preloading content. Read more →
- Connector type USB-A, USB-C or a dual-head design. This decides the housing geometry and whether the drive works with the phones and laptops your audience actually uses. Read more →
- Housing material and finish Metal, PVC or wood behave differently under printing and engraving, and they carry different tooling costs. Pick the material before the artwork, not after. Read more →
- Branding method Pad print, screen print, laser engraving and epoxy dome each have a minimum feature size. A logo that is legible in a PDF may not be reproducible on the shell. Read more →
- Tooling ownership A custom shell needs a mould. Say up front whether the tooling is charged once, amortised into the unit price, or held for your exclusive use — and who keeps it afterwards. Read more →
- Packaging A custom box usually has a far higher minimum than the drive itself, because it is a separate print run. Confirm the box MOQ before you commit to the drive quantity. Read more →
- Preloaded content and labelling If the drive ships with software, media or documentation, say so early — it affects the file system, the test flow and the packing step. Read more →
Manufacturing process
Each unit is built from sourced NAND and a controller solution selected to your host and workload, placed and soldered on our own SMT line, programmed, then capacity-verified with a full write-and-read-back and read/write tested before packing. The same configuration is held across repeat batches.
Test conditions, BOM and what we declare
A capacity or speed figure without the conditions behind it is not checkable. These are the conditions we test under, and the claims we will put in writing on the quotation.
| Check | Method and condition | What it establishes |
|---|---|---|
| Capacity | Full write-and-read-back with H2testw or F3, on a known-good reader over the interface quoted | The unit stores the capacity it claims, end to end |
| Read / write | Sequential transfer of a single file larger than the cache, repeated, on the quoted interface | The sustained figure for that configuration, not a peak burst |
| Reader recognition | Enumeration on Windows, macOS and Linux hosts | The unit mounts and reports its capacity across systems |
| Appearance and print | Visual check against the approved sample under neutral light | Branding and body match what was approved |
Bill of materials
NAND source, grade, controller solution and package format are stated on the quotation before the order is placed. A substitution is raised with you before it is made — it is not something you discover on arrival.
Batch consistency
The approved configuration is held across repeat batches: same silicon grade, same controller, same test method. Sample size and acceptance criteria are agreed per batch and written into the order rather than assumed.
Compliance documents
RoHS documentation and SGS test reports are available on request. CE and FCC are market requirements we build against; we do not claim to hold certificates we have not been issued.
What we do not publish
A machine-readable datasheet per model is not available yet. Dimensions and weights are measured; tolerances and test logs are quoted per order rather than published as a generic figure.
This is for you if
- Companies ordering branded drives for events, gifts or software delivery
- Brands that need a bespoke moulded shape
- Buyers who want to control both the branding and the silicon inside
This is not for you if
- Buyers who need single-unit retail purchase today
- Projects requiring next-day local production and domestic fulfilment
What fails in the field, and what prevents it
The complaints that reach us about USB drives are rarely about the flash. They are about the shell, the print, the firmware or the box — the parts that were never written into the specification.
Real transfer speed is far below the interface name
A drive can carry a USB 3.0 connector and still write at USB 2.0 rates if the controller or the NAND cannot keep up. Judge a sample by measured throughput on your own files, not by the port.
Real speed vs advertised USB →A host rejects the drive, or a firmware update bricks it
Some hosts are strict about the controller's reported descriptors, and a firmware rewrite can change behaviour that used to work. Freeze the firmware once the host compatibility is proven.
Firmware as a storage risk →The logo wears off in the first weeks
Print adhesion depends on the shell material, the surface treatment and the ink system together. On metal, engraving survives handling in a way that surface print may not.
Gold logo on black metal: marking methods →The quote jumps once packaging is added
A printed box is a separate production run with its own minimum. Budgeting the drive alone and discovering the box MOQ later is the single most common surprise in a gifting programme.
Why 100 drives can mean 500 boxes →Ordering USB Flash Drive: MOQ, samples, lead time and testing
| Question | Answer |
|---|---|
| Minimum order quantity | Set by capacity, controller solution and how much customisation is involved — confirmed with your quotation. See how MOQ is set. |
| Samples | Available, and recommended before volume — particularly for printed artwork or a bespoke mould. See how samples work. |
| Lead time | Depends on configuration, branding and whether tooling is needed. Confirmed in the quotation against your target date. See what drives lead time. |
| Testing | Capacity and read/write verification before packing. You can verify independently with a full write-and-read-back — the method is published here. |
| How to request a quote | Product type, capacity, quantity, application and target date is enough to start. Open the quote form, or see what to include. |
Specify your usb flash drive
Tell us the capacity, quantity, application and target date. We confirm MOQ and lead time against your specification rather than quoting a generic figure — and we reply to business enquiries within 1 business day.
Or email cathy@go-wintel.com — answered by Cathy, sales engineer.
From the factory floor
Photographs taken at our own facility in Shenzhen. Nothing on this page is a stock image or a rendering of a product we do not make.
USB Flash Drive — the bodies we run
Each body below is a distinct shell, not a colour option on the same tooling. The flash inside is the same; what changes is the case — dimensions, weight, print area and how the drive is carried.
| Body | Style | Dimensions | Weight | Capacity |
|---|---|---|---|---|
| Metal card body 51 × 21 | Card | 51 × 21 × 9 mm | 5 g | 128MB–32GB |
| Metal bar 33 / 39 mm | Bar | 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) | 8 g | 128MB–32GB |
| Swivel 67 × 19.5 | Swivel | 67.5 × 19.5 × 10.7 mm | 10 g | 128MB–64GB |
| Plastic card body 51 × 21 | Card | 51 × 21 × 9 mm | 5 g | 128MB–32GB |
| Mini swivel 45 × 15 | Swivel | 45 × 15 × 8 mm | 10 g | 512MB–32GB |
| Mini 30 × 12.5 | Mini | 30 × 12.5 × 5 mm (24 × 12 × 4 mm version for tighter housings) | 6 g | 128MB–32GB |
| Paw-shape 42 × 12 | Shaped | 42 × 12 × 5 mm | 10 g | 8GB–64GB |
| Robot-shape 65 × 20 | Shaped | 65 × 20 × 10 mm | 8 g | 8GB–64GB |
| USB-C swivel 68 × 16 | Swivel | 68 × 16 × 11 mm | 12 g | 16GB–128GB |
| Dual-connector OTG 70 × 20 | Swivel | 70 × 20 × 5 mm | 30 g (as supplied) | 16GB–128GB |
| Swivel 57 × 20 | Swivel | 57 × 20 × 10 mm | 14 g | 8GB–64GB |
| Wheat-straw bar | Bar | 85 × 45 × 18 mm packed; moulded bar, 8 g | 8 g | 8GB–64GB |
| Folding dual 32 × 15 | Folding dual | 32.5 × 15.2 mm, 20 g | 20 g | 16GB–128GB |
USB Flash Drive — frequently asked questions
What branding methods can you apply?
Silk-screen printing, full-colour printing and laser engraving. Which one suits your artwork depends on the body material — tell us your design and target body and we will confirm the method.
Can you make a custom shape?
Yes. Bespoke moulds are available for projects that need a shape based on your own product, logo or mascot. Send your design files and target quantity to start a tooling discussion.
What capacity should I order?
It depends on what you are loading onto the drive. For software, media kits and presentations, 8GB to 32GB covers most uses. Our capacity guide shows how many documents, photos, songs or hours of video fit on each size.
How long does production take?
Lead time depends on the body, the branding method and whether a new mould is needed. Send your specification and deadline and we will confirm a schedule in the quotation — we do not publish a single lead time that pretends to cover every order.
What is the minimum order quantity?
MOQ varies with body style, branding method and whether tooling is required. Share your requirement and we will confirm the MOQ with the price.