Mini USB Drive — 30 × 12.5 × 5 mm, Sits Flush in the Port
This is the shortest metal body we run: 30 × 12.5 × 5 mm, 6 g. Its purpose is not to be carried but to be left in — a drive that stays plugged into a laptop, a car head unit or a signboard and does not block the port next to it. Capacity runs 128MB to 32GB. If the drive has to be removed and reinserted daily, a body with more to grip is the better choice. WINTEL supplies this from its own plant in Shenzhen, China.
At a glance
- Body styleMini
- MaterialMetal (zinc alloy)
- Dimensions30 × 12.5 × 5 mm (24 × 12 × 4 mm version for tighter housings)
- Weight6 g
- InterfaceUSB 2.0 / USB 3.0
- Capacities128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB / 32GB
- ReferenceMN-30
What this body is
The shortest body in the range, and the only one designed to be forgotten. At 30 mm it clears the neighbouring port and does not catch on a bag, which is the whole reason it exists.
| Property | Value |
|---|---|
| Body | Metal, 30 × 12.5 × 5 mm |
| Weight | 6 g |
| Interface | USB 2.0 or USB 3.0 |
| Capacity range | 128MB – 32GB |
| Read / write | Up to 25 MB/s read, ~10 MB/s write (USB 2.0) |
| Print area | Approximately 22 × 9 mm on one face |
| Grip | None — the body is the grip |
| Branding | Laser engraving, silk-screen |
| Default packing | Poly bag |
| Tooling | Stock mould |
| Minimum order | 50 pieces per design |
What you can specify on this body
Capacity
128MB · 256MB · 512MB · 1GB · 2GB · 4GB · 8GB · 16GB · 32GB
Interface
USB 2.0 / USB 3.0
Colour
Black · Silver · Gold
Branding
Laser engraving · Silk-screen print
Packing: Poly bag by default. Small gift box available on request.
Tooling: Stock mould. At this size there is no room for a keyring loop or a second opening.
Typical production time once the sample is approved: 1–3 days on stock bodies; engraving adds the approval step..
When this one is the right choice
Drives that live in a port
Car head units, signage players, thin clients and kiosks — anywhere the drive is a semi-permanent part rather than something carried.
Laptops with tight port spacing
At 12.5 mm wide it leaves the adjacent USB port usable. A card body at 21 mm wide does not, which is the practical reason buyers pick this one.
Low-profile branding
A small engraved mark on the top face, read by the person using the machine rather than by a recipient opening a box.
When it is not
- Daily insertion and removal. There is nothing to grip — the body is 5 mm thick and pulls out by the edges, which is awkward on a stiff port.
- Artwork with detail. Roughly 22 × 9 mm is a mark, not a layout, and fine text will fill in.
- Anyone who needs a keyring. There is no loop, and adding one would mean a different body.
What to confirm before the order is placed
- Measure the port recess before choosing. A 30 mm body still needs clearance in front of the socket, and a deeply recessed port can swallow it to the point where it cannot be pulled out.
- Check the port spacing on the target device. If two USB ports sit side by side, 12.5 mm works; if they are stacked vertically, the height matters instead.
- Keep artwork inside 22 × 9 mm. Engraving on a small face is legible; print at that size starts to dot.
- If the drive will be in a hot enclosure, say so. The body is metal and will conduct heat from whatever it is plugged into.
This body in photographs
Other bodies in this family
Same flash inside, different shell — the body decides tooling cost, print area and how the drive survives daily use. Compare on those three, not on the photo.
| Model | Body style | Dimensions | Material | Best for |
|---|---|---|---|---|
| Mini 30 × 12.5 — this page | Mini | 30 × 12.5 × 5 mm (24 × 12 × 4 mm version for tighter housings) | Metal (zinc alloy) | Drives that live in a port |
| Metal bar 33 / 39 mm | Bar | 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) | Anodised aluminium | Keyring and lanyard programmes |
| Mini swivel 45 × 15 | Swivel | 45 × 15 × 8 mm | Metal (zinc alloy) | Keyrings and badge lanyards |
| Plastic card body 51 × 21 | Card | 51 × 21 × 9 mm | ABS plastic | High-volume promotional runs |
| Metal card body 51 × 21 | Card | 51 × 21 × 9 mm | Metal (zinc alloy body) | Tender and bid packs |
| Swivel 67 × 19.5 | Swivel | 67.5 × 19.5 × 10.7 mm | Metal (zinc alloy) | Drives that live in a bag or a pocket |
| Paw-shape 42 × 12 | Shaped | 42 × 12 × 5 mm | Anodised aluminium | Veterinary, pet retail and animal charities |
Where this body ends up
- In-vehicle and signage players Left in the port, low profile
- Software and media distribution Licence and driver carriers
Quote this body
Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.
Or email cathy@go-wintel.com — answered by Cathy, sales engineer.
Frequently asked questions
Will it fit in a recessed USB port?
Not always, and this is the question to settle before the order. A mini body is short, so in a deep recess the drive can sit below the surrounding panel and be difficult to pull out. Measure the recess depth and the clearance in front of the socket, not just the port width.
Does it block the neighbouring port?
At 12.5 mm wide, no — that is the main reason buyers choose it over the 21 mm card bodies. If the device has stacked ports rather than side-by-side ones, the 5 mm height is what matters instead.
How much can be engraved on it?
About 22 × 9 mm on one face. That takes a logo and one short line, or a serial number. A logo with a tagline underneath will not resolve — engraving has a minimum stroke width and fine detail fills in.
Can it be supplied with a cap?
Not in this body. A cap would double the length and defeat the purpose. If the connector needs protection, a swivel body that closes over its own plug is the alternative.
Is this body available in other colours?
Black, silver and gold as stock. Other colours are a plating or coating run with their own minimum, which rarely makes sense at this size and order volume.