Metal Bar USB Drive — 33 mm and 39 mm, 8 g Anodised Body

In short

A metal bar drive is the slimmest body in the range: 33 × 12 × 5 mm or 39 × 12 × 5 mm, 8 g, anodised aluminium with a hole through one end for a keyring or lanyard. It carries 128MB to 32GB and is the body buyers pick when the drive has to travel on a keyring without adding bulk. The trade is print area — a 12 mm width leaves little room for anything beyond a short mark. WINTEL supplies this from its own plant in Shenzhen, China.

Eight anodised aluminium bar USB drives in a row, in gold, gunmetal, silver, black, red, rose gold, blue and green

At a glance

  • Body styleBar
  • MaterialAnodised aluminium
  • Dimensions33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long)
  • Weight8 g
  • InterfaceUSB 2.0 / USB 3.0
  • Capacities128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB / 32GB
  • ReferenceMB-33

What this body is

This is the body that survives being carried rather than stored. At 5 mm thick with an anodised skin, it takes scratches that would strip paint off a plastic shell — and the colour is in the oxide layer, not on top of it.

PropertyValue
Body Anodised aluminium bar — 33 mm, 39 mm or 48 mm, same tool
Lengths 33 mm and 39 mm (both 12 × 5 mm section)
Weight 8 g
Interface USB 2.0 or USB 3.0
Capacity range 128MB – 32GB
Read / write Up to 25 MB/s read, ~10 MB/s write (USB 2.0)
Keyring Hole through the tail end, both lengths
Print area Approximately 24 × 8 mm on the 33 mm; 30 × 8 mm on the 39 mm
Branding Laser engraving, silk-screen, pad print
Default packing Poly bag
Tooling Stock mould
Minimum order 50 pieces per design

What you can specify on this body

Capacity

128MB · 256MB · 512MB · 1GB · 2GB · 4GB · 8GB · 16GB · 32GB

Interface

USB 2.0 / USB 3.0

Colour

Black · Silver · Gold · Red · Blue · Green · Purple · Yellow · Pink

Branding

Laser engraving · Silk-screen print · Pad print

Packing: Poly bag by default. Lanyard, keyring and gift box quoted separately.

Tooling: Stock extrusion and mould. Length can be quoted in two fixed sizes; a different length needs its own tool.

Typical production time once the sample is approved: 1–3 days on stock bodies; engraving adds the approval step..

When this one is the right choice

Keyring and lanyard programmes

The hole is moulded into the tail, not drilled afterwards, and 8 g does not pull a lanyard out of shape. This is the body that gets carried every day.

Small-capacity tender and software dongles

128MB to 2GB is often all a licence file, a driver set or a signed document needs, and the bar body keeps that cheap without looking like a clip-on afterthought.

Colour-coded sets

Anodising runs across the full colour range from one body, so a set can be separated by department, by year or by market without a second tool.

When it is not

  • Artwork that needs a large flat area. At 12 mm wide, the printable face is roughly 24 × 8 mm — a full logo lockup with a tagline will not be legible.
  • Orders above 32GB. If the brief needs 64GB or 128GB, this body is not the one; move up to the 51 × 21 mm card body or a swivel.
  • Buyers wanting a body that stands up on a desk. The bar lies flat and has no stand — it is designed to be carried, not displayed.

What to confirm before the order is placed

  • Choose the length before the artwork. 33 mm and 39 mm have different print areas, and a layout approved on one will not transfer to the other unchanged.
  • Anodised colour is a bath process, so a reorder six months later will be close to the approved swatch rather than identical. If the drive has to match other branded material, approve a sample from the second run as well.
  • Specify whether the keyring is supplied or the buyer adds it. The hole is standard; the ring, lanyard or clip is a separate item with its own cost and packing step.
  • Laser engraving gives one tone — the colour of the metal under the oxide. If the artwork depends on two colours, it has to be printed, and print on a 12 mm face will be small.

This body in photographs

Eight anodised aluminium bar USB drives in a row, in gold, gunmetal, silver, black, red, rose gold, blue and green
The bar body across the anodised range. Colour is the cheapest thing to vary and the hardest to repeat exactly — a reorder is matched to a swatch, not to the last batch.

Other bodies in this family

Same flash inside, different shell — the body decides tooling cost, print area and how the drive survives daily use. Compare on those three, not on the photo.

Model Body style Dimensions Material Best for
Metal bar 33 / 39 mm — this page Bar 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) Anodised aluminium Keyring and lanyard programmes
Metal card body 51 × 21 Card 51 × 21 × 9 mm Metal (zinc alloy body) Tender and bid packs
Mini 30 × 12.5 Mini 30 × 12.5 × 5 mm (24 × 12 × 4 mm version for tighter housings) Metal (zinc alloy) Drives that live in a port
Swivel 67 × 19.5 Swivel 67.5 × 19.5 × 10.7 mm Metal (zinc alloy) Drives that live in a bag or a pocket
Plastic card body 51 × 21 Card 51 × 21 × 9 mm ABS plastic High-volume promotional runs
Mini swivel 45 × 15 Swivel 45 × 15 × 8 mm Metal (zinc alloy) Keyrings and badge lanyards
Paw-shape 42 × 12 Shaped 42 × 12 × 5 mm Anodised aluminium Veterinary, pet retail and animal charities

Where this body ends up

Quote this body

Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.

Or email cathy@go-wintel.com — answered by Cathy, sales engineer.

Frequently asked questions

Why two lengths of the same body?

Because 6 mm changes what fits. The 33 mm version sits inside a pocket or a badge holder without protruding; the 39 mm version gives 6 mm more print width, which is often the difference between a readable logo and an unreadable one. Both are the same 12 × 5 mm section and the same 8 g.

Will the anodised colour scratch off?

It does not flake like paint, because the colour is in an oxide layer grown from the aluminium itself rather than coated onto it. Deep gouges will show bare metal, and a keyring body will accumulate fine scratches — that is the honest trade for a metal body carried daily.

How large a logo fits?

Roughly 24 × 8 mm on the 33 mm body and 30 × 8 mm on the 39 mm. That is enough for a mark and a short line of text, not for a full lockup with a tagline. Send the artwork and we will tell you what survives at that size before you commit.

Can it be supplied without the keyring hole?

The hole is part of the stock mould. A version without it would be a new tool, which only makes sense at a volume that justifies it — for most orders the answer is to use a body that already has the outline you want.

USB 2.0 or 3.0 in this body?

Both are available. The interface changes the internal board and the connector, not the outside of the bar. USB 3.0 is quoted per project rather than from the USB 2.0 band.

WhatsApp / WeChat Request a quote