Swivel USB Drive — 67.5 × 19.5 × 10.7 mm, No Cap to Lose
A swivel drive carries its connector on a pivot: rotate the body and the plug swings out, rotate back and it is protected. This one measures 67.5 × 19.5 × 10.7 mm and weighs 10 g, so it is a full-size metal body rather than a keyring novelty. It removes the single most common failure in a cap-style drive — the cap that gets lost in the first week — at the cost of a pivot joint that has to be specified properly. WINTEL supplies this from its own plant in Shenzhen, China.
At a glance
- Body styleSwivel
- MaterialMetal (zinc alloy)
- Dimensions67.5 × 19.5 × 10.7 mm
- Weight10 g
- InterfaceUSB 2.0 / USB 3.0
- Capacities128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB / 32GB / 64GB
- ReferenceSW-67
What this body is
Every cap-style drive loses its cap. The swivel answers that with a joint instead of a lid, and the joint is the part to inspect on the sample: it is what decides whether the drive still holds its connector open after two years in a bag.
| Property | Value |
|---|---|
| Body | Metal swivel, 67.5 × 19.5 × 10.7 mm |
| Weight | 10 g |
| Mechanism | Pivot: connector rotates into the body, no cap |
| Interface | USB 2.0 or USB 3.0 |
| Capacity range | 128MB – 64GB |
| Read / write | Up to 25 MB/s read, ~10 MB/s write (USB 2.0) |
| Detents | Two positions — closed and fully open |
| Print area | Both flat faces of the outer shell |
| Branding | Laser engraving, silk-screen, colour print, pad print |
| Default packing | Poly bag |
| Tooling | Stock mould |
| Minimum order | 50 pieces per design |
What you can specify on this body
Capacity
128MB · 256MB · 512MB · 1GB · 2GB · 4GB · 8GB · 16GB · 32GB · 64GB
Interface
USB 2.0 / USB 3.0
Colour
Silver · Black · Gold · Rose gold
Branding
Laser engraving · Silk-screen print · Colour print · Pad print
Packing: Poly bag by default. Gift box and lanyard quoted separately.
Tooling: Stock swivel mould. A bespoke outline needs a new tool plus a pivot design, which is a longer project than a print change.
Typical production time once the sample is approved: 1–3 days on stock bodies; engraving adds the approval step..
When this one is the right choice
Drives that live in a bag or a pocket
No cap means nothing to lose and nothing to find. For a drive carried daily, that removes the most common reason a working drive becomes unusable.
Two-sided branding
Both flat faces of the outer shell are printable, so one side can carry the logo and the other a capacity line, a URL or a serial — without shrinking either.
Capacity above 32GB in a metal body
This body runs to 64GB, which the slim bar bodies do not. That makes it the practical metal option when the brief includes video or a full software image.
When it is not
- Recessed or flush ports. At 10.7 mm thick plus the connector, the body will foul a recessed USB socket long before it seats.
- Orders needing a very small or very light drive. At 10 g and 67.5 mm long this is a substantial object; the mini bodies are a third of the weight.
- Any brief where the pivot will be operated constantly by the end user, such as a shared kiosk. A cap-style or a slide body is the better answer where the mechanism is worked hundreds of times a day.
What to confirm before the order is placed
- Open and close the sample at least twenty times before approving it. The detents should hold the connector fully open under its own weight and should not loosen measurably in that test.
- Check that the closed position actually covers the connector. On a cheap swivel the connector can sit proud of the shell when closed, which defeats the whole point.
- Artwork has to account for the pivot line. A logo that runs across the joint will break in two when the drive is opened.
- Confirm the capacity with the interface — 64GB on USB 2.0 is a slow combination for large files, and the buyer should know that before the order rather than after.
This body in photographs
Other bodies in this family
Same flash inside, different shell — the body decides tooling cost, print area and how the drive survives daily use. Compare on those three, not on the photo.
| Model | Body style | Dimensions | Material | Best for |
|---|---|---|---|---|
| Swivel 67 × 19.5 — this page | Swivel | 67.5 × 19.5 × 10.7 mm | Metal (zinc alloy) | Drives that live in a bag or a pocket |
| Swivel 57 × 20 | Swivel | 57 × 20 × 10 mm | Metal (zinc alloy) | Graduation and award programmes |
| Mini swivel 45 × 15 | Swivel | 45 × 15 × 8 mm | Metal (zinc alloy) | Keyrings and badge lanyards |
| Dual-connector OTG 70 × 20 | Swivel | 70 × 20 × 5 mm | Metal (zinc alloy) | Mixed audiences |
| Metal card body 51 × 21 | Card | 51 × 21 × 9 mm | Metal (zinc alloy body) | Tender and bid packs |
| Metal bar 33 / 39 mm | Bar | 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) | Anodised aluminium | Keyring and lanyard programmes |
| Plastic card body 51 × 21 | Card | 51 × 21 × 9 mm | ABS plastic | High-volume promotional runs |
Where this body ends up
- Promotional and event drives Carried daily, no cap to lose
- Software and media distribution Up to 64GB for images and video
Quote this body
Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.
Or email cathy@go-wintel.com — answered by Cathy, sales engineer.
Frequently asked questions
Does the swivel mechanism wear out?
It can, and that is what the sample is for. A well-made pivot uses a metal pin with defined detents; a poor one relies on plastic friction and loosens until the connector flops. Open and close the sample repeatedly and judge the detents, not the finish.
Can the connector be damaged when the drive is closed?
That is the failure mode to check on the sample. With the shell closed, the connector should be fully inside. If it protrudes even slightly, the drive will catch on whatever it touches and the plug will bend — the shell is protecting nothing at that point.
How much of the body can be printed?
Both flat outer faces, avoiding the pivot line and the edge wrap. Because the shell splits at the pivot, a design that crosses the joint will be interrupted when the drive opens. Design within one face.
Is 64GB a real capacity for this body?
Yes, and it is the top of the range for the swivel. Above that the brief has to move to a different body or to a card, because the board that fits the swivel tops out there.
Can it be engraved rather than printed?
Yes. Engraving on a metal shell removes the plating or the anodised layer and reads as a tone difference, which is durable but single-colour. On a two-tone body, check the sample: the engraved mark takes the colour of the metal underneath, not the surface.