Customer-Supplied Packaging for Flash Orders
Yes — send the packaging to the factory and we will pack the drives into it. It is the cheapest way to make a 200-piece order look like a brand instead of a sample box, because the print run happens at your printer rather than ours, and the print minimum that usually outweighs the drive minimum stops applying. What replaces it is a date problem rather than a cost problem: the cartons have to be in Shenzhen before the packing day, and if they are not, the drives wait on your freight instead of ours. WINTEL supplies this from its own plant in Shenzhen, China.
What this covers
What we can pack into
Folding cartons, sleeves, tins, pouches, blister packs, gift boxes, inserts, manuals and warranty cards — anything that arrives at the factory in usable condition and fits the product.
Receiving and checking
We count the cartons on arrival and report what we find — short counts, crushed corners, print defects — with photographs, before packing starts rather than after.
Packing to your instruction
Which unit goes into which pack, insert order, seal or shrink, and where the barcode or label sits. Send it as a written instruction or a photograph of an approved sample pack.
Fit confirmation before the run
We check the drive against the cavity or the inner dimension. A pack designed around a different body is the most common reason a packaging order arrives and does not work.
What does not change
The drive itself. Same bodies, same capacities, same test record, and the same 50-piece minimum per design — supplying your own packaging does not move the product minimum.
Shortfalls and damage
Settled before the first shipment, not argued about afterwards: either you top up the shortage on the next freight, or the balance ships in neutral bags so the order is not held hostage by ten crushed boxes.
How the process runs
- Send the packaging spec Pack type, inner dimensions or cavity size, the quantity of packs, and the drive model going into them.
- Fit and count check We confirm the product fits and tell you how many spare packs to send — a 2–3% buffer is normal on a first run.
- Materials arrive The packaging reaches our Shenzhen address on your freight. Who clears it and who pays duty is agreed before the first shipment, not discovered at the port.
- Receive and report We count and inspect on arrival and send photographs of anything that will not pack cleanly, before we start.
- Pack and ship Drives packed to your instruction, checked against the approved sample pack, then shipped against the agreed schedule.
What buyers push back on
The date, not the box
Buyers who supply their own packaging are buying control over how the product looks. What they underestimate is that the critical path moves to their printer and their freight forwarder.
Nobody wants to pay twice
Damaged packs mean a second print run and a second freight. A small buffer on the first shipment is cheaper than an air freight of replacement cartons.
The pack has to fit the drive
Cavities are designed to a millimetre. A box built for a 56 mm body will not hold a 60 mm one, and this is discovered at the packing table if nobody checked it earlier.
One place to point at when it goes wrong
When packaging and product come from two suppliers, the argument about who is responsible starts immediately. Counting and photographing on arrival is what stops it.
Send us the product type, capacity, quantity, branding requirement and target date. We reply to business enquiries within 1 business day.
Or email cathy@go-wintel.com — answered by Cathy, sales engineer.
Frequently asked questions
Can you pack our drives in packaging we supply?
Yes. Send the packaging to our Shenzhen address and we pack the drives into it at our packing station. We count and inspect on arrival and report any shortage or damage with photographs before packing starts.
Does supplying my own packaging remove the packaging minimum?
Yes — the print minimum belongs to your printer, so it stops applying to us. The product minimum does not move: 50 pieces per design still applies, and each design still carries its own print setup on the drive itself.
Where do I send the packaging, and who clears it?
To our factory in Shenzhen, on your freight. How the materials enter China — who clears them, who pays duty and VAT on them — is settled before the first shipment. It is a short conversation at the start and an expensive one at the port if nobody had it.
What happens if some of the packaging arrives damaged?
We photograph and count on arrival, before packing. You then choose: top up the shortage on the next freight, or let the balance ship in neutral bags. What we will not do is pack damaged cartons and let you find out at the other end.
How many spare packs should I send?
On a first run, 2–3% above the drive quantity is normal. Packaging gets crushed in transit, printed cartons have spoilage, and a reprint plus a second freight costs far more than the buffer.
Can you store leftover packaging for my next order?
That is agreed per project rather than assumed. The default is that leftover materials ship with the goods, because storing another company’s printed cartons indefinitely is a liability neither side wants.
Can you print the packaging as well, so I do not have to ship it?
Yes — that is the standard route and it is quoted in the same document as the drives. Supplying your own packaging makes sense when you already have a printer, a brand system and a freight forwarder. If you do not, printing through us is usually the shorter path.
Does customer-supplied packaging change the price?
The packaging line comes off our quotation, and you carry the material cost and the freight into China instead. Whether the total is lower depends on your print volume, not on the arrangement — at small volumes the shipping usually eats the saving.