TF Card Capacity Estimator
Enter your recording parameters and the estimator returns a capacity range. The same camera at 4K and at 1080p, or set to loop recording rather than kept for 30 days, needs very different cards — so the tool asks for the workload instead of a fixed number. WINTEL supplies TF cards from 4GB to 256GB, and this tells you which band of that range your workload lands in before you ask for a quote.
How the estimate is built
Data per hour (GB) = bitrate (Mbps) × 3600 ÷ 8 ÷ 1024.
Total data (GB) = data per hour × recording hours per day × retention window (days). With loop recording, the window is one overwrite cycle; without it, the full number of days you keep footage.
With margin = total data × (1 + margin%).
The suggested card size rounds up to a standard capacity (16 / 32 / 64 / 128 / 256 / 512 GB).
Limitations
- This is a planning aid, not a guarantee. Real usage varies with codec, bitrate fluctuation, file-system overhead and how the device writes.
- The file system matters: cards above 32 GB are typically SDXC and use exFAT; some older hosts only read FAT32 and will not see a larger card.
- Sustained write, not peak read, is what continuous recording needs. Capacity alone does not prove the card can hold a 24/7 write loop.
- Confirm the capacity and speed against your actual device before ordering volume.
Sources
- SD Association — Capacity (SD/SDHC/SDXC/SDUC)
SDHC spans more than 2GB up to 32GB and uses the FAT32 file system; SDXC spans more than 32GB up to 2TB and uses exFAT. Speed grades cover C2/C4/C6/C10, UHS U1/U3, and Video Speed Class V6/V10/V30/V60/V90.
- Microsoft — Microsoft exFAT technology licensing
exFAT is a Microsoft-patented file system that allows single files larger than 4GB (the FAT32 limit); the SD Association adopted exFAT for high-capacity, high-speed SDXC / SDUC cards.
- Microsoft — Azure RTOS FileX User Guide — exFAT / FAT32
FAT32 caps a single file at 4GB and by default addresses storage media up to 32GB; exFAT allows single files of roughly 1 EB; flash / SD cards above 32GB require exFAT.
- IEC / ISO (joint maintenance, IEC 60027 series context) — IEC 80000-13:2025 — Quantities and units, Part 13: Information science and technology
One gigabyte is 1,000,000,000 bytes while one gibibyte is 2^30 bytes (1,073,741,824), a ratio of about 0.9313. Both figures are correct under the standard, which is why a nominal 32GB part legitimately reports about 29.8GiB to a binary-based host.
External sources explain industry standards and are accessed on 2026-10-18. They describe the standard, not WINTEL product parameters.
Related: U1 vs U3 vs V30, TF card RFQ checklist, request a quote.
Frequently asked questions
How does the estimator arrive at a capacity?
It multiplies bitrate by recording hours to get data per hour, totals it over the retention period you want, then adds a margin for file system overhead and fragmentation. The margin is the part most buyers skip, and it is why a card that looks big enough fills up early.
Why add a margin on top of the raw total?
Because a card is never empty in normal use. File system structures, deleted-but-not-overwritten data and recording overhead all consume space, and a card that runs close to full slows down and wears faster. The margin is headroom, not padding.
Does a larger card always solve a capacity problem?
No. If the device overwrites in a loop, a larger card mainly extends the rewrite interval, which helps endurance. If the device writes sequentially and never deletes, a larger card only delays the point where someone has to retrieve the data.